Ventilation Hood

1. Product Overview

The Malloca MH 700GT is a high-performance, sleek ventilation hood designed for modern kitchens. It features:

• Touch and gesture control for easy operation.
• 850 m³/h maximum airflow for efficient ventilation.
• 3 adjustable fan speeds for different cooking conditions.
• LED lighting for clear visibility while cooking.
• Aluminum grease filter for trapping cooking residues.
• Charcoal filter for odor neutralization in recirculation mode.

2. Operation Instructions

Step 1: Power On / Adjusting Fan Speed

1. Tap the Fan Speed button to choose between low, medium, or high speed to turn on.
   • Low speed is ideal for light cooking, such as simmering or boiling.
   • Medium speed is suited for moderate cooking with steam or light frying.
   • High speed is recommended for heavy cooking that produces strong odors or smoke, such as grilling or frying.

Step 3: Using Gesture Control

• Simply swipe your hand in front of the control panel to turn the hood on or off, or to change fan speeds without touching the surface.

Step 4: Activating the LED Light

• Tap the Light button to turn on the 5W LED lights, which provide bright illumination over the stovetop. Tap again to turn off.

Step 5: Setting the Timer

• To set the hood to automatically turn off after cooking, press the Timer button and use the touch controls to adjust the time. This feature helps save energy.

Step 6: Power Off

• After cooking, press the Power button to turn off the hood. Ensure that the fan speed is returned to its lowest setting before powering off.

3. Cleaning and Maintenance

Aluminum Grease Filter:

• The aluminum grease filter captures grease and oil particles. For optimal performance, it should be cleaned regularly:
  1. Remove the filter by pressing the release tabs.
  2. Wash the filter in warm, soapy water or in the dishwasher on a gentle cycle.
  3. Allow it to dry completely before reinstalling.

Charcoal Filter:

• If the hood is installed in recirculation mode, it uses a charcoal filter to neutralize odors. Replace the filter every 6 to 12 months depending on usage. Follow the instructions in the manual for replacing it.

Glass and Control Panel:

• Use a soft, damp cloth to wipe the glass surface and control panel. Avoid abrasive cleaners to prevent scratching.

4. Safety and Precautions

• Ensure that the ventilation hood is connected to a properly grounded power supply.
• Avoid leaving the hood on high speed for extended periods to prevent overheating.
• Do not operate the hood without the grease filter in place.
• Turn off the hood and allow it to cool before cleaning.

5. Troubleshooting

The Hood Doesn’t Turn On:

• Check that the hood is properly plugged into the power outlet.
• Ensure the power supply is active.

Poor Suction Power:

• Clean the grease filter or replace the charcoal filter if operating in recirculation mode.
• Check for blockages in the venting system.

Touch Controls Not Responding:

• Wipe the control panel to remove any grease or dirt that might interfere with the touch sensors.
• If using gesture control, ensure your hand is within range of the sensor.

6. Technical Specifications

Noise level: 52 dB

Max airflow: 850 m³/h

Power: 220-240V / 230W

Lighting: 5W LED